THAT
PESKY SCROTUM A
common problem guys have as they pump up is that the suction pulls
the ballsac up into the cylinder. The best way to minimize this
problem is to wear a cylinder that's just 1/4" wider than the
base of your shaft. That way your shaft will quickly expand to block
it off. If you need to start with a wider tube, you can keep the
scrotum down by cinching it with a wide rubber band or cockstrap.
Also, use tacky lube to seal; liquid lube tends to run down onto
the ballsac, making it slide in more easily. |
Rob cinches
his ballsac for pleasure but it also keeps the sac out of
the tube. |
 
Deadpirate
cinches his balls with a wide jelly ring. |
|
